What do your spirometry results actually mean?
Spirometry measures two things: how much air you can blow out of your lungs in one forced breath (FVC), and how much of that comes out in the very first second (FEV1). The relationship between those two numbers, the FEV1/FVC ratio, tells your doctor whether your airways are narrowed (obstruction), whether your lungs are holding less air than expected (restriction), or whether everything looks normal for someone of your age, height and sex.
It is completely normal to leave the appointment with a printout full of numbers and very little explanation. This guide walks through your spirometry results explained in plain English, so you can follow the conversation when your GP, practice nurse or respiratory team discusses them with you.
Key takeaways
- Spirometry measures how much air you can exhale and how quickly. The two headline numbers are FVC (volume) and FEV1 (speed in the first second).
- The FEV1/FVC ratio is usually read first. A low ratio suggests an obstructive pattern, often seen in asthma or COPD.
- A low FVC with a normal ratio suggests a restrictive pattern, which usually leads to further tests to find the cause.
- Results are compared to predicted values based on factors such as your age, height and sex, so a percentage on the report is not a score out of a hundred.
- Leave interpretation to your healthcare team. The same numbers can mean very different things depending on your history, and a normal result does not always rule everything out.
What happens during a spirometry test?
Spirometry is a breathing test done with a machine called a spirometer. You will usually be asked to take the deepest breath you can, seal your lips around a mouthpiece, and then blow out as hard and fast as possible until your lungs feel empty. The machine records how much air you blow out and how quickly it comes out.

You may be asked to repeat the blow a few times so the best result can be used, and you might be given a bronchodilator (a reliever inhaler medication) partway through so the team can see whether your airways respond to it.
High-quality spirometry performed well in a GP surgery can be as reliable as testing done in a hospital pulmonary function laboratory, so there is no need to worry that an office-based test is somehow second-rate.
What are FEV1, FVC and the FEV1/FVC ratio?
These three values are the heart of every spirometry report.
FVC: forced vital capacity
FVC is the total volume of air you can forcefully blow out after taking the deepest breath possible. Think of it as a measure of the size of your lungs, or how much air they can hold and move.
FEV1: forced expiratory volume in one second
FEV1 is how much of that total comes out in the first second of the blow. It is a measure of speed: how quickly air can leave your lungs. If your airways are narrowed, air exits more slowly, so FEV1 falls.
FEV1/FVC: the ratio
The ratio between the two numbers is usually the first thing a clinician reads, because it separates two very different problems. If the ratio is low, air is coming out too slowly for the size of your lungs, which suggests narrowing of the airways. If the ratio is normal but both numbers are small, your lungs are simply not holding much air.
If you would like a simpler refresher on the numbers themselves before going further, our guide to lung capacity and spirometry numbers covers the basics step by step.
Why are my results shown as a percentage of predicted?
Next to each number on your report you will see a percentage. This is not a mark out of a hundred and it does not grade your effort. Your result is being compared against predicted values: an average calculated for people who share your age, height, sex and ethnic background, because all four of these factors change what a healthy lung can do.
A 68-year-old man of 5 foot 7 is not expected to produce the same FEV1 as a 25-year-old of 6 foot 2, and the software accounts for that automatically. So a percentage tells you how your lungs compare with what would normally be expected for someone like you, not against the population as a whole.
What is an obstructive pattern?
An obstructive defect is indicated by a low FEV1/FVC ratio. Published guidance commonly defines this as a ratio below 70% (or below the fifth percentile of predicted values) in adults, and In children and adolescents, interpretation should use the lower limit of normal (percent predicted/z-score) for age rather than a single fixed ratio threshold.. When the ratio is low, air is being exhaled too slowly, which happens when the airways are narrowed.
Obstruction is the pattern typically associated with conditions such as asthma and COPD, but the spirometry numbers alone cannot tell you which condition you have. That depends on your symptoms, history, examination and other tests, which is why interpretation belongs with your clinician.
Reversibility: the bronchodilator response
If obstruction is found, the next question is whether it is reversible. You may be given a short-acting bronchodilator and the test repeated. In adults, a meaningful response is generally an improvement in FEV1 or FVC of at least 12% and at least 0.2 litres; in children and young people aged five to 18, an increase of more than 12% is used.
Asthma is typically reversible in this way, whereas COPD generally is not, although individual results vary and clinicians look at the whole picture rather than one number.
How is severity graded?
Once an abnormality is identified, FEV1 expressed as a percentage of the predicted value is used to describe how severe it is. Interestingly, these severity cut-offs were largely determined by expert consensus rather than being based directly on evidence from patient outcomes, which is one reason doctors treat them as a guide rather than a verdict.
What is a restrictive pattern?
A restrictive pattern is indicated by an FVC below the fifth percentile of predicted values in adults, or In children and adolescents, a restrictive pattern is suggested by an FVC below the lower limit of normal for age, with a normal or high FEV1/FVC ratio., with a normal or high FEV1/FVC ratio. In plain terms, the lungs are not holding as much air as expected, but what does come out moves at a normal speed.
Possible contributors to a low FVC include lung scarring, chest wall or muscle problems, and sometimes weight, among others. Because spirometry alone cannot confirm the cause, a restrictive pattern usually prompts fuller lung function tests, including a measurement called diffusing capacity (DLCO), to confirm the finding and narrow down the diagnosis.
What if both numbers are low, or the results are normal?
A mixed pattern
If both the FEV1/FVC ratio and the FVC are low, the report is described as showing a mixed defect, combining features of obstruction and restriction. This can be more complex to interpret and often leads to referral for fuller testing.
A normal result does not always end the story
It can be frustrating to have ongoing symptoms and a normal spirometry report. Normal results do not rule out every breathing problem. For example, if asthma is still suspected despite normal spirometry, a different test called bronchoprovocation testing may be used to look for airway responsiveness. If your symptoms continue, go back to your GP and describe what you are experiencing; a normal test is a piece of information, not a
What questions should I ask about my spirometry report?
Bring your questions to the follow-up appointment. Useful ones include:
- Which of my numbers, if any, are outside the predicted range, and by how much?
- Does my report show an obstructive, restrictive or mixed pattern, or a normal result?
- Did I have a bronchodilator response, and what did it show?
- Do I need any further tests to explain these results?
- Will spirometry be repeated to monitor how my lungs are doing over time?
That last question matters: spirometry is not only used for diagnosis but also to monitor the progression of lung disease and the response to therapy over time.
If you or someone else is severely breathless, cannot speak in full sentences, or has blue or grey lips, call 999.
Try it: Peak flow percentage calculator
FAQ
Is a low percentage on my report bad news?
Not necessarily on its own. The percentage shows how your result compares with predicted values for people of similar age, height and sex. Clinicians read the pattern formed by several numbers together, alongside your symptoms and history, before drawing any conclusions.
Can spirometry diagnose asthma or COPD?
Spirometry is a powerful tool that clinicians use alongside other information when assessing breathing problems, but a diagnosis is never based on the numbers alone. Patterns such as reversibility help distinguish between them, and your clinician weighs the results alongside your symptoms and medical history.
Why do I have to blow so many times?
Several efforts help confirm the results are reliable and repeatable. The test is effort-dependent, so the team wants to make sure the best, most consistent blow is recorded.
Can I trust a home spirometer?
Home readings should always be treated with caution, as blowing technique and the absence of professional interpretation can affect what the numbers mean. If you are tracking results at home, share them with your healthcare team rather than acting on them yourself.
What if my results are abnormal but I feel fine?
If your report shows an abnormality, attend the follow-up your GP arranges, and mention any breathlessness, cough or chest tightness you notice. If a persistent cough was the reason for your test, our article on why a cough can last eight weeks or more may help you prepare for that conversation.
In summary
Your spirometry report boils down to a few core ideas: FVC measures how much air your lungs can push out, FEV1 measures how fast it leaves, and the ratio between them points clinicians towards either an obstructive or restrictive pattern, or reassurance. The percentages are comparisons with people built like you, and every abnormal finding needs professional interpretation alongside your symptoms.
If your report mentions airway narrowing and your breathlessness or cough is still being investigated, it may help to read our piece on why asthma symptoms often get worse at night before your next appointment. And whatever your numbers say, the most valuable next step is the same: take your questions to your GP or respiratory team, who can put the results in the context of you as a whole person.
Sources
- Office Spirometry: Indications and Interpretation (PubMed)
- A stepwise approach to the interpretation of pulmonary function tests (PubMed)
- How to interpret spirometry results: a practical guide
This article is general information and not a substitute for professional medical advice.
If you have symptoms or concerns, speak to your GP or a qualified health professional.
Editorial note: this is general health information, not medical advice. Our articles are written and checked against published guidance by our editorial team and are not reviewed by a clinician unless the article says so. If your care team has told you something different, follow their advice.

Leave a Reply